Cove Moulding
WOOD TYPES
Diamond Millwork works with all American Hardwoods including: Hard & Soft Maple, Red & White Oak, Cherry, Walnut, Birch and Poplar as well as Clear & Rustic Hickory, Clear & Rustic Alder, Rustic, Quarter Sawn & Rift Cut White Oak, Yellow and White Pine, and Cypress.
We also work with imported woods such as mahogany, cedar, and accoya. Other imported woods are available upon request and availability.
If you like, we can even work with your supplied lumber. Please contact us to discuss any special requests.
All the wood shown in the catalogue is maple.
#CR-15 W: 1⁄2” P: 1⁄2” D: 1⁄2”
#CR-14 W: 1 1/16” P: 3⁄4” D: 3⁄4”
#CR-162 W: 1 7/16” P: 1”D: 1”
#CR-101 W: 4 1/8” P: 3” D: 3”
#CR-102 W: 5 1⁄2” P: 4” D: 4”
#CR-100 W: 2 13/16” P: 2”D: 2”
#CR-40 W: 3 1/16” P: 2 3/16” D: 2 1⁄4”
#CR-301 W: 3 7/16” P: 2 1⁄2” D: 2 7/16”
#CR-109 W: 4 1/8” P: 3 1/16” D: 3 1/16”
#CR-110 W: 5 7/16” P: 3 7/8” D: 4”
#CR-1554 W: 6 7/16” P: 4 3⁄4” D: 4 3⁄4”
#CR-68 W: 1 3/8” P: 1 3/16” D: 1 1⁄4”
#CR-113 W: 2 5/8” P: 2” D: 1 3⁄4”
#CR-48-52 W: 4 1/8” P: 2 11/16” D: 3 1⁄4”
#CR-225 W: 4 7/16” P: 3 1⁄4” D: 3 3/16”
#CR-278 W: 3 3⁄4” P: 2 3/8” D: 3 1/16”
#CR-226 W: 3 3/16” P: 2 1⁄4” D: 2 1⁄4”
#CR-224 W: 5 7/16” P: 3 15/16” D: 3 15/16”
#CR-282 W: 5 13/16” P: 4 1/8” D: 4 1/8”
#CR-229 W: 2 3/16” P: 1 9/16” D: 1 1⁄2”
#CR-1442 W: 2 5/16” P: 1 7/8” D: 1 7/8”
#CR-200 W: 3 7/16” P: 2 1⁄2” D: 2 1⁄2”
#CR-274-52 W: 3 1/8” P: 1 11/16” D: 2 3⁄4”
#CR-98 W: 3 7/16” P: 2 5/16” D: 2 5/8”
#CR-245 W: 4 1⁄4” P: 3” D: 3”
#CR-170 W: 5 3/16” P: 3 3⁄4” D: 3 13/16”
#CR-276-52 W: 3 11/16” P: 2” D: 3 1/8”
#CR-198 W: 4 15/16” P: 3 11/16” D: 3 1⁄2”
#CR-161 W: 3 3/8” P: 2 7/16” D: 2 1⁄2”
#CR-216 W: 5 11/16” P: 3 3/8” D: 3 5/8”
#CR-168 W: 5 1/8” P: 3 3/8” D: 3 7/8”
#CR-315-52 W: 6”P: 4 15/16” D: 4 11/16”
